Safety Light Curtains For Hand Protection LC Series

Model : LC Series / Parallel Beams

Electronic switches offers safety light curtain for hand Protection with Parallel Beams - LC Series offering various models and covering different covered heights. Pitch offered is 20, 30, 40, and 50 mm. Product is offered with Powder coated Aluminum housing with connecting cables.

Features

  • NPN, PNP or Both outputs
  • Multiple ranges available as required
  • LED indication for output status
  • Non Critical alignment between the Sensors
  • Available in Aluminium Housing
  • Available in multiple covered heights

Product Variants

Protected Height Models Beams Pitch mm Overall Height
150 LC 0630  6 30 245
180 LC 1020  10 20 295
200 LC 0640  6 40 295
210 LC 0830  8 30 295
250 LC 0650  6 50 345
270 LC 1030  10 30 365
280 LC 0840  8 40 370
300 LC 1620  16 20 405
330 LC 1230  12 30 410
350 LC 0850  8 50 440
360 LC 1040  10 40 455
380 LC 2020  20 20 485
440 LC 1240  12 40 545
450 LC 1050  10 50 545
450 LC 1630  16 30 530
500 LC 2620  26 20 615
570 LC 2030  20 30 650
600 LC 1640  16 40 685
620 LC 3220  32 20 740
690 LC 2430 24 30 770
750 LC 1650  16 50 840
760 LC 2040  20 40 855
780 LC 4020  40 20 885
810 LC 2830  28 30 890
920 LC 2440 24 40 1010
930 LC 3230 32 30 1010
940 LC 4820  48 20 1015
1050 LC 3630  36 30 1130
1080 LC 2840  28 40 1170
1100 LC 5620 56 20 1205
1170 LC 4030 40 30 1255
1240 LC 3240 32 40 1335
1290 LC 4430 44 30 1385
1400 LC 3640 36 40 1500
1410 LC 4830 48 30 1490
1530 LC 5230 52 30 1620
1550 LC 3250 32 50 1650
1560 LC 4040 40 40 1665
1650 LC 5630 56 30 1730
1720 LC 4440 44 40 1830
1880 LC 4840 48 40 1970
1890 LC 6430 64 30 1970
2040 LC 5240 52 40 2160

Specifications

Series / Type LC Series  /  Parallel Beams Type  /  Two Outputs in Parallel
Power Supply 12 – 24 Volts DC / Reverse Polarity Protected
Output PNP or NPN
Output Indications Through LEDs
channel Indication LED indication for each channel
Response Time On to Off : 10 – 15 m sec. Off to On : 50 – 100 m sec
No of beams 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64
Beam By Pass Provided in hand/body protection models
Protected Heights 90 – 2000 mm
Pitch offered 20, 30,40, 50 mm
Adjustable Range  300 mm (min) –  3 / 5 / 10 / 15 / 20  meters ( Higher also available )
Standard Cable length  5 meters for emitter, 3 meters for receiver
Operating Temperature Up to 55 Degrees centigrade
Cross Section 36 x 42 mm
Electrical Connections  Plug in Connector for Emitter & Receiver
Applicable to  Directly work with PLCs / Controllers
Protections Output short circuit protected.
Vibration Resistance Amplitude : 0.75 mm (p) Freq : 10 – 55 Hzs, Rate : 1 Octave / min
Operating ambient Light 500 Lux ( max.) when source is places opposite to receiver,  > 3000 lux when source placed at an angle of 20 degrees
Suitable for Machines with quick emergency stop

Applications

  • For Hand safety while using Power Presses
  • Suitable for Pneumatic or Hydraulic Power Presses
  • As Safety Barriers for various machines
  • Used in Injection Moulding Machines for Sliding Door
  • Also used in Tyre molding, forging presses, conveyor belts
  • Also used for Paper Cutting Machines