Model : FX Series - Cross Beams
Electronic switches offers safety light curtain for hand Protection with Cross Beams - X Series offering various models and covering different covered heights. Pitch offered is 20, 30, 40, 50mm. Product is offered with Powder coated Aluminum housing with connecting cables.
Features
- NPN, PNP or Both outputs
- Multiple ranges available as required
- LED indication for output status
- Non Critical alignment between the Sensors
- Available in Aluminium Housing
- Available in multiple covered heights
Product Variants
| Protected Height | Models | Beams | Pitch mm | Overall Height |
|---|---|---|---|---|
| 150 | LX 0630 | 16 | 30 | 150 |
| 180 | LX 1020 | 28 | 20 | 180 |
| 200 | LX 0640 | 16 | 40 | 200 |
| 210 | LX 0830 | 22 | 30 | 210 |
| 250 | LX 0650 | 16 | 50 | 250 |
| 270 | LX 1030 | 28 | 30 | 270 |
| 280 | LX 0840 | 22 | 40 | 280 |
| 300 | LX 1620 | 46 | 20 | 300 |
| 330 | LX 1230 | 34 | 30 | 330 |
| 350 | LX 0850 | 22 | 50 | 350 |
| 360 | LX 1040 | 28 | 40 | 360 |
| 380 | LX 2020 | 58 | 20 | 380 |
| 440 | LX 1240 | 34 | 40 | 440 |
| 450 | LX 1050 | 28 | 50 | 450 |
| 450 | LX 1630 | 46 | 30 | 450 |
| 500 | LX 2620 | 76 | 20 | 500 |
| 570 | LX 2030 | 58 | 30 | 570 |
| 600 | LX 1640 | 46 | 40 | 600 |
| 620 | LX 3220 | 94 | 20 | 620 |
| 690 | LX 2430 | 70 | 30 | 690 |
| 750 | LX 1650 | 46 | 50 | 750 |
| 760 | LX 2040 | 58 | 40 | 760 |
| 780 | LX 4020 | 118 | 20 | 780 |
| 810 | LX 2830 | 82 | 30 | 810 |
| 920 | LX 2440 | 70 | 40 | 920 |
| 930 | LX 3230 | 94 | 30 | 930 |
| 940 | LX 4820 | 142 | 20 | 940 |
| 1050 | LX 3630 | 106 | 30 | 1050 |
| 1080 | LX 2840 | 82 | 40 | 1080 |
| 1100 | LX 5620 | 166 | 20 | 1100 |
| 1170 | LX 4030 | 118 | 30 | 1170 |
| 1240 | LX 3240 | 94 | 40 | 1240 |
| 1290 | LX 4430 | 130 | 30 | 1290 |
| 1400 | LX 3640 | 106 | 40 | 1400 |
| 1410 | LX 4830 | 142 | 30 | 1410 |
| 1530 | LX 5230 | 154 | 30 | 1530 |
| 1550 | LX 3250 | 94 | 50 | 1550 |
| 1560 | LX 4040 | 118 | 40 | 1560 |
| 1650 | LX 5630 | 166 | 30 | 1650 |
| 1720 | LX 4440 | 130 | 40 | 1720 |
| 1880 | LX 4840 | 142 | 40 | 1880 |
| 1890 | LX 6430 | 190 | 30 | 1890 |
| 2040 | LX 5240 | 154 | 40 | 2040 |
Specifications
| Series / Type | LX Series / Cross Beams Type / Two Outputs in Parallel |
| Power Supply | 12 – 24 Volts DC / Reverse Polarity Protected |
| Output | PNP or NPN / NO or NC |
| Output Indications | Through LEDs |
| channel Indication | LED indication for each channel |
| Response Time | On to Off : 10 – 15 m sec. Off to On : 50 – 100 m sec |
| No of beams | 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 |
| Beam By Pass | Provided in hand/body protection models |
| Protected Heights | 90 – 2000 mm |
| Pitch offered | 20, 30,40, 50 mm |
| Adjustable Range | 500 mm (min) – 3 / 5 / 10 / 15 / 20 Meters (Higher range also available) |
| Standard Cable length | 5 meters for emitter, 3 meters for receiver |
| Operating Temperature | Up to 55 Degrees centigrade |
| Cross Section | 36 x 42 mm |
| Electrical Connections | Plug in Connector for Emitter & Receiver |
| Applicable to | Directly work with PLCs / Controllers |
| Protections | Output short circuit protected. |
| Vibration Resistance | Amplitude : 0.75 mm (p) Freq : 10 – 55 Hzs, Rate : 1 Octave / min |
| Operating ambient Light | 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees |
| Suitable for | Machines with quick emergency stop |
Applications
- For Hand safety while using Power Presses
- Suitable for Pneumatic or Hydraulic Power Presses
- As Safety Barriers for various machines
- Used in Injection Moulding Machines for Sliding Door
- Also used in Tyre molding, forging presses, conveyor belts
- Also used for Paper Cutting Machines