Model : FX Series - Cross Beams
Electronic switches offers safety light curtain for Finger Protection with Cross Beams - FX Series offering various models and covering different covered heights. Pitch offered is 11 mm. Which senses any finger in danger zone. Product is offered with Powder coated Aluminum housing with connecting cables.
Features
- NPN, PNP or Both outputs
- Multiple ranges available as required
- LED indication for output status
- Non Critical alignment between the Sensors
- Available in Aluminium Housing
- Available in multiple covered heights
Product Variants
| Protected Height | Models | Beams | Pitch mm | Overall Height |
|---|---|---|---|---|
| 100 | FX 1011 | 28 | 11 | 205 |
| 165 | FX 1611 | 46 | 11 | 275 |
| 245 | FX 2411 | 70 | 11 | 370 |
| 340 | FX 3211 | 94 | 11 | 455 |
| 430 | FX 4011 | 118 | 11 | 545 |
| 515 | FX 4811 | 142 | 11 | 630 |
| 605 | FX 5611 | 166 | 11 | 720 |
| 695 | FX 6411 | 190 | 11 | 805 |
| 781 | FX 7211 | 213 | 11 | 905 |
Specifications
| Series / Type | FX Series / Cross Beams Type / Two Outputs in Parallel |
| Power Supply | 12 – 24 Volts DC / Reverse Polarity Protected |
| Output | PNP or NPN |
| Output Indications | Through LEDs |
| channel Indication | LED indication for each channel |
| Response Time | On to Off : 10 – 15 m sec. Off to On : 50 – 100 m sec |
| No of beams | 28, 46, 70, 94, 118, 142, 166, 190, 213 |
| Beam By Pass | Provided in hand/body protection models |
| Protected Heights | 90 – 2000 mm |
| Pitch offered | 11 mm |
| Adjustable Range | 150 mm – 3000 mm |
| Standard Cable length | 5 meters for emitter, 3 meters for receiver |
| Operating Temperature | Up to 55 Degrees centigrade |
| Cross Section | 36 x 42 mm |
| Electrical Connections | Plug in Connector for Emitter & Receiver |
| Applicable to | Directly work with PLCs / Controllers |
| Protections | Output short circuit protected. |
| Vibration Resistance | Amplitude : 0.75 mm (p) Freq : 10 – 55 Hzs, Rate : 1 Octave / min |
| Operating ambient Light | 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees |
| Suitable for | Machines with quick emergency stop |
Applications
- For Hand safety while using Power Presses
- Suitable for Pneumatic or Hydraulic Power Presses
- As Safety Barriers for various machines
- Used in Injection Moulding Machines for Sliding Door
- Also used in Tyre molding, forging presses, conveyor belts
- Also used for Paper Cutting Machines